Power On Setup - Olympus Stylus 500 Advanced Manual

Power on setup

You can select a picture and/or sound volume to be displayed/output when
the power is turned on. You can also register your favorite picture and
display it on the screen. g"Screen setup" (P.95)
Mode dial
Top menu [MODE MENU]
1
Select [OFF], [1] or [2] for
[SCREEN], then press b.
OFF No picture is displayed.
1 A picture is displayed.
2 The registered picture is displayed.
If there is no registered picture,
nothing is displayed.
2
Select [OFF], [LOW] or [HIGH] for
[VOLUME], then press b .
OFF
LOW/HIGH Startup sound is output.
3
Press e.
7
Note
• [OFF] cannot be selected for [VOLUME] when [SCREEN] is set to [OFF].
94
[SETUP]
No startup sound is output.
[PW ON SETUP]
g"Menus" (P.15)
PW ON SETUP
SCREEN
VOLUME
SELECT
PW ON SETUP
SCREEN
VOLUME
SELECT
OFF
1
2
GO OK
OFF
LOW
HIGH
GO OK