Playback On A Tv - Olympus Stylus 500 Advanced Manual

Playback on a TV

Use the AV cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
Mode dial
1
Make sure that the TV and camera are turned off. Connect the
multi-connector on the camera to the video input terminal on
the TV using the AV cable provided with the camera.
Connect to the TV's video input
(yellow) and audio input (white)
terminals.
6
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction manual.
3
Press the POWER switch to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
TIPS
• You are recommended to use the optional AC adapter when playing back
pictures on a TV.
• The close-up playback, index display and auto playback functions can also
be used on a TV screen.
Note
• Make sure that the camera's video output signal type is the same as the TV's
video signal type. g"Video output selection" (P.85)
• The camera's monitor turns off automatically when the AV cable is connected
to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
84
Connector cover
AV cable
(provided)
Hook your finger on this
part and pull open the
connector cover.
Multi-connector