Sony DVP-S715 Operating Instructions Manual page 8

Getting Started
z
If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display. (page 36)
pWhen using an optical digital connecting cord
Take off the cap and plug in the optical digital connecting
cord.
CD/DVD player
pWhen using a coaxial digital connecting cord
CD/DVD player
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby* Digital (AC-3) format directly
using an MD deck or DAT deck.
When you make the connections above, set
"DIGITAL OUT" in "INITIAL SETUP 2" to "PCM."
Otherwise, a loud noise will suddenly come out
from the speakers, affecting your ears or causing
the speakers to be damaged.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol a are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
8 GB
Downloaded From Disc-Player.com Sony Manuals
Optical digital connecting cord
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
DIGITAL IN
OPTICAL COAXIAL
PCM/MPEG
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Coaxial digital connecting cord
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
OPTICAL COAXIAL DIGITAL IN
PCM/MPEG
DOLBY DIGITAL (AC-3)
DIGITAL OUT
z
pWhen using an optical digital connectiong cord
OPTICAL
pWhen using a coaxial digital connectiong cord
COAXIAL
If you have a digital component with a built-in MPEG
Audio decoder or Dolby Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connectiong cord (not supplied). When the component
with a built-in MPEG Audio decoder or Dolby Digital
decoder is connected, the player plays DVDs with sound
recorded in MPEG Audio and Dolby Digital (AC-3)
format while producing the effect of being in a movie
theater or a concert hall.
In the menu, set "DIGITAL OUT" in "INITIAL SETUP 2"
to "MPEG", "DOLBY DIGITAL" or "MPEG/DOLBY
DIGITAL." (page 36)
Optical digital connectiong cord
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
Component with a
built-in MPEG Audio
decoder or Dolby
CD/DVD player
Digital decoder
OPTICAL COAXIAL
PCM/MPEG
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Coaxial digital connectiong cord
(not supplied)
CD/DVD player
OPTICAL COAXIAL
PCM/MPEG
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Note
Refer to the instructions supplied with the component to
be connected.
DIGITAL IN
OPTICAL
Component with a
built-in MPEG Audio
decoder or Dolby
Digital decoder
DIGITAL IN
COAXIAL