Sony DVP-S715 Operating Instructions Manual page 15

z
z
When playing VIDEO CDs with
When "RESUME" appears on
PBC functions
the front panel display
PBC playback starts
You can resume playback
automatically.
from the point where you
stopped the CD/VIDEO CD.
z
To cancel PBC playback of a
For details on playing from
VIDEO CD with PBC functions
the beginning of the disc, see
and play the disc in
page 25.
Continuous Play mode
There are two ways.
•Before you start playing,
select the track you want
using =or +, then
press ENTER or ·.
•Before you start playing,
select the track number
using the number buttons
on the remote, then press
ENTER or ·.
z
"Play without PBC"
What is a track?
appears on the TV screen
See page 5.
and the player starts
z
What is an index?
Continuous Play. You
See page 5.
cannot play still pictures
z
such as a menu screen.
What is a scene?
To return to PBC playback,
See page 5.
press p twice then press
z
You can also use the controls
·.
on the player
If the controls on the player
have the same names as
those on the remote, you can
use them.
z
If you want to change the
search mode
Press SEARCH MODE. Each
time you press in case of a
z VIDEO CD, "SCENE
You can also use the controls
SEARCH," "TRACK
on the player
SEARCH" and "V. (VIDEO)
If the controls on the player
INDEX SEARCH" appear on
have the same names as
the TV screen. In case of a
those on the remote, you can
CD, only "TRACK
use them.
SEARCH" appears.
Note
z
If you want to change the
Depending on the VIDEO CD,
search speed (DVP-S315 only)
"Press ENTER" in Step 3 may be
Two speeds are available:
expressed as "Press SELECT" in
1) or 10 (about 10 times
the instructions supplied with the
the normal speed) and 2)
disc.
or 20 (about 30 times).
Each time you press 3 or #,
the indication changes as
follows:
1) (10) , 2) (20)
Note
Some discs do not allow you to
start playing from a particular
scene. In this case, if you do
Scene Search before you start
playing, the player starts playing
from scene 1. If you do Scene
Search while playing a disc, the
player starts playing from the
current scene.
Downloaded From Disc-Player.com Sony Manuals Downloaded From Disc-Player.com Sony Manuals
Playing VIDEO CDs with PBC Functions (PBC Playback –
DVP-S715
VIDEO CD Only)
6
When playing VIDEO CDs with PBC functions (Ver. 2.0 discs), you
can enjoy simple interactive operations, operations with search
1 2 3
Number buttons
functions, etc.
4 5 6
PBC Playback allows you to play VIDEO CDs interactively, following
CLEAR
7 8 9
the menu screen on the TV screen.
0
ENTER
On this player, you can use the number buttons, ENTER, =, +,
SEARCH MODE
>/. and ˆ(RETURN) during PBC Playback.
=/+
DVP-S715
p
P
·
1 2 3
ENTER
4 5 6
Number buttons
7 8 9
0
ENTER
=/+
ˆ(RETURN)
To
Stop
ENTER
Pause
Resume play after pause
>/.
Go to the next track in
Continuous Play mode
Go back to the preceding
track in Continuous Play
mode
1
Start playing a VIDEO CD with PBC functions, following Steps
Select the track
1 to 4 in "Playing a VIDEO CD" on page 14.
2
Select the item number you want.
Select the scene before you start
On the player
playing a VIDEO CD with PBC
functions and during PBC playback
Press >/. to select the item number.
(Scene Search)
On the remote
Locate a point while monitoring Press the number button of the item you want.
the picture (Scan)
(DVP-S315 only)
3
Press ENTER.
Stop play and remove the disc
4
Follow the instructions on the menu screen for interactive
If you have made a mistake when you press the number button.
operations.
Press CLEAR, then the correct number button.
Refer to the instructions supplied with the disc, as the operating
procedure may differ according to the VIDEO CD.
Going back to the menu screen
Press ˆ, =, or +.
Basic Operations Basic Operations
DVP-S315
1 2 3
4 5 6
7 8 9
0
DVP-S315
1 2 3
4 5 6
7 8 9
0
Press
p
P
P or ·
+
=
1 SEARCH MODE repeatedly until "TRACK
SEARCH" appears on the TV screen.
2 Number buttons to select the track number,
then ENTER or ·.
1 SEARCH MODE repeatedly until "SCENE
SEARCH" appears on the TV screen.
2 Number buttons to select the scene number,
then ENTER or ·. (To check the current scene
number, press DISPLAY. The scene number
appears at the left top of the TV screen.)
3/#. You will not hear the sound during this
operation. When you find the point you want,
press · to return to the normal speed.
6
6
Number buttons
CLEAR
ENTER
SEARCH MODE
=/+
3/#
p
P
·
ENTER
Number buttons
ENTER
=/+
ˆ(RETURN)
ENTER
>/.
15 GB GB