Caring For Your Label Maker - Dymo letratag User Manual

Caring for Your Label Maker

Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance. Clean your label
maker from time to time to keep it working properly. Clean the
cutter blade each time you replace the label cassette.
!
The cutter blade is extremely sharp. Use caution when
cleaning.
To clean the cutter blade
1. Dampen a cotton ball with alcohol.
2. Remove the label cassette.
3. Place the tip of a ball-point pen or
pencil on the black post as shown in
Figure 6, and press the post down.
4. While holding down the post, press
and hold the cutter lever to expose the cutter blade.
5. Release the post and clean both sides of the blade with the
cotton ball.
6. Release the cutter lever.
!
You can also follow this procedure if the cutter blade becomes
lodged in the forward position and will not move.
18
Press in
and hold
Print
Head
Figure 6