Connecting An External Monitor - NEC NP3150 User Manual

Connecting an External Monitor

audio cable (not supplied)
AUDIO
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
or component image you're projecting.
NOTE:
• Daisy chain connection is not possible.
• The MONITOR OUT connector will output no video signal (Digital signal) from the COMPUTER 3 (DVI-D) IN connector.
• When audio equipment is connected, the projector speaker is disabled.
• When [NORMAL] is selected from [STANDBY MODE], the MONITOR OUT connector outputs the last displayed video signal and
the AUDIO OUT jack outputs the last audio signal. The sound level remains the same as the last one.
• Selecting [POWER-SAVING] in [STANDBY MODE] stops outputting a video signal from the MONITOR OUT connector during
standby mode. This causes the AUDIO OUT jack to stop outputting sound.
Downloaded From projector-manual.com NEC Manuals
COMPUTER 1 IN (or COMPUTER 2 IN / COMPONENT IN)
MONITOR OUT
Vga signal cable (not supplied)
IN
USB(LAN)
AUDIO OUT

2. Installation and Connections
audio cable (not supplied)
Vga signal cable (supplied)
phONE