Using Software Keyboard to enter an encryption key
1. Select one of [KEY 1], [KEY 2], [KEY 3] and [KEY 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT button to select [OK] and press the EN-
TER button.
The software keyboard will disappear.
When [WPA-PSK] or [WPA2-PSK] is selected in [SECURITY TYPE]:
WPA-PSK. . .............. Uses.WPA-PSK.encryption.mode.for.more.secure.transmission.than.WEP.
WPA2-PSK. . ............ Uses.WPA2-PSK.encryption.mode.for.more.secure.transmission.than.WPA.
* WPA-PSK (TKIP) provides stronger security than WEP where encryption keys are automatically changed, also
providing simple authentication, WPA, PSK and TKIP stand for Wi-Fi Protected Access, Pre-Shared Key and
Temporal Key Integrity Protocol respectively.
ENCRYPTION TYPE:
KEY:
[DOmAIN]
HOST.NAME........... Type.in.a.hostname..Up.to.15.alphanumeric.characters.can.be.used.
DOMAIN.NAME. . ..... Type.in.domain.name.of.the.network.connected.to.the.projector..Up.to.60.alphanumeric.characters.can.be.
Downloaded From projector-manual.com NEC Manuals
Select [TKIP] or [AES].
Enter encryption key when selecting [WPA-PSK] or [WPA2-PSK] is selected in [SECU-
RITY TYPE]. Key length must be eight or greater and 63 or less.
used.
6. Using On-Screen Menu