NEC NP3150 User Manual page 113

Selecting Aspect Ratio and position for Screen [SCREEN]
SCREEN.TyPE........ Select.one.of.two.options:.4:3.SCREEN.or.WIDE.SCREEN.for.the.screen.to.be.used..See.also.[ASPECT.
POSITION............... This.feature.allows.you.to.adjust.the.vertical.position.of.the.image.when.WIDE.SCREEN.has.been.selected.
(not.available.
on.NP3151W)
NOTE:
• After changing the screen type, check the setting of [ASPECT RATIO] in the menu. (→page 84)
• [POSITION] is not available when [4:3 SCREEN] is selected for [SCREEN TYPE] or when [LETTERBOX] is selected for [ASPECT
RATIO].
Downloaded From projector-manual.com NEC Manuals
RATIO].
(→.page.84)
for.the.screen.type.
When.WIDE.SCREEN.has.been.selected.there.is.no-signal.area.above.and.below.the.image.
NOTE: This option is available only when [WIDE SCREEN] is selected in [SCREEN TYPE].
no-signal area
99
6. Using On-Screen Menu