NEC NP3150 User Manual page 130

Selecting Default Source [Default Source Select]
You can set the projector to default to any one of its inputs each time the projector is turned on.
Last. . ..................... sets.the.projector.to.default.to.the.previous.or.last.active.input.each.time.the.projector.is.turned.on.
auto...................... searches.for.an.active.source.in.order.of.Computer1.→.Computer2.→.Computer3.→.Component.
Computer.1......... displays.the.rGB.source.from.the.Computer.1.in.connector.every.time.the.projector.is.turned.on..
Computer.2......... displays.the.rGB.source.from.the.Computer.2.in.connector.every.time.the.projector.is.turned.on.
Computer.3......... displays.the.rGB.source.from.the.Computer.3(dVi-d).in.connector.every.time.the.projector.is.turned.
Component. . ........ displays.the.component.source.from.the.Component.in.connector.every.time.the.projector.is.turned.
Video..................... displays.the.Video.source.from.the.Video.in.connector.every.time.the.projector.is.turned.on.
s-Video................. displays.the.Video.source.from.the.s-Video.in.connector.every.time.the.projector.is.turned.on.
Viewer.................. displays.slides.from.the.usB.memory.device.every.time.the.projector.is.turned.on.
networK.............. displays.a.signal.from.Lan.port.(rJ-45).or.the.usB.wireless.Lan.unit.
Selecting Signal format [Signal Select]
Computer 1/2
Allows you to set [Computer 1] and [Computer 2] to automatically detect an incoming rGB or component
source such as a computer or DVD player. However there may be some rGB and component signals that the
projector is unable to detect. In this case, select [rGB] or [Component].
Selecting [color SyStem]
this feature enables you to select video standards manually.
normally select [Auto]. Select the video standard from the pulldown menu. this must be done for Video and
S-Video Connectors separately.
Setting monitor out connector [out terminal]
this option allows you to determine which rGB or component source is output from the monItor out connector
during Standby mode.
Last. . ..................... the.signal.from.the.last.Computer.1,.Computer.2.or.Component.input.will.be.output.to.the.moni-
Computer.1,.2..... the.signal.from.the.Computer.1.or.Computer.2.input.will.be.output.to.the.monitor.out.connector.
Component. . ........ the.signal.from.the.Component.input.will.be.output.to.the.monitor.out.connectors.
Downloaded From projector-manual.com NEC Manuals
→.Video.→.s-Video.→.Viewer.→ Computer1.and.displays.the.first.found.source.
on..
on.
tor.out.connector.
116
6. Using On-Screen Menu