NEC NP3150 User Manual page 125

6. Using On-Screen Menu
[SECURITY] (required for wireless only)
SECURITY TYpE
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryp-
tion, specify WEP key.
DISABLE................. Will.not.turn.on.the.encryption.feature..your.communications.may.be.monitored.by.someone.
WEP(64bit)............. Uses.64-bit.datalength.for.secure.transmission.
WEP(128bit)........... Uses. 128-bit. datalength. for. secure. transmission.. This. option. will. increase. privacy. and. security. when.
compared.to.use.of.64-bit.datalength.encryption.
WPA-PSK. . .............. Uses.WPA-PSK.encryption.mode.for.more.secure.transmission.than.WEP.
WPA2-PSK. . ............ Uses.WPA2-PSK.encryption.mode.for.more.secure.transmission.than.WPA.
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in your wireless network.
• When you use WEP, your image transmission speed will slow down.
• [WPA-PSK] and [WPA2-PSK] are not available when [AD HOC] is selected from [NETWORK TYPE].
KEY SELECT:
Selects one key from the four keys below when selecting [64BIT] or [128BIT] in [SECURITY TYPE].
KEY1-4:
Enter encryption key when selecting [64BIT] or [128BIT] in [SECURITY TYPE].
Up to 5 characters can be set in 64 bit, and up to 13 characters in 128 bit.
The key can also be set in hexadecimal digit.
Press the [HEX] button to change to [ASCII] to set the key in ASCII digit. You can toggle this button between [ASCII]
and [HEX].
* Enter 0x(numeral and alphabet respectively) right in front of your key code.
* Hexadecimal uses 0 to 9 and A to F.
* When setting in a hexadecimal digit, up to 10 characters can be set in 64 bit, and up to 26 characters in 128
bit.

Downloaded From projector-manual.com NEC Manuals