NEC NP3150 User Manual page 107

Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT  or  button to select [SETTINGS] and press the EN-
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required.
ACTIVE..............................Place.a.check.mark.to.enable.the.program.
DAy. . ..................................Select. days.of.the.week.for.the.program.. To. execute. the. program. from.Monday. to.Friday,. select.
TIME..................................Set.the.time.to.execute.the.program..Enter.time.in.24-hour.format.
FUNCTION.........................Select.a.function.to.be.executed..Selecting.[POWER].will.allow.you.to.turn.on.or.off.the.projector.
ADVANCED.SETTINGS. . .....Select.power.on/off.or.a.type.of.video.source.for.the.selected.item.in.[FUNCTION].
REPEAT. . ............................Place. a. check. mark. to. repeat. the. program. continuing. basis.. To. use. the. program. this. week. only,.
Downloaded From projector-manual.com NEC Manuals
[MON-FRI].To.execute.the.program.in.everyday.basis,.select.[EVERyDAy].
by.setting.[ADVANCED.SETTINGS]..Selecting.[SOURCE].will.allow.you.to.select.a.video.source.by.
setting.[ADVANCED.SETTINGS].
clear.the.check.mark.
93
6. Using On-Screen Menu