Nvr Networking - Ganz NR8-32M78 Quick Start Manual

Network Video Recorder(NVR)
Quick Start Guide
The NVR has two network ports, that is, LAN1 and LAN2. Two networking solutions
are supported, namely camera private networking mode and free networking mode.
Solution 1: Camera Private Networking Mode
A private network for cameras includes only IP cameras and NVRs and does not
include other network devices. The network is especially used to transmit audio and
video of NVRs and IP cameras. The private network for cameras must be connected to
LAN2 of the NVR and the function of private network for cameras must be enabled on
LAN2 (by default, it is enabled upon delivery). For details of the configuration, see
quick setup in the NVR User Manual. The NVR can be accessed through LAN1.
After the function of private network for cameras is enabled on LAN2, the NVR will
perform the following operation:

Enabling the DHCP service and automatically assigning IP addresses to IP cameras
(the DHCP function is enabled on the IP cameras).

Automatically searching for IP cameras in the network.

Automatically adding searched IP cameras and enabling 7*24-hour recording.
Figure 2-1 shows the topology of the private network for cameras.
Figure 2-1 Topology of the private network for cameras
Issue V1.1 (2016-02-22)
2

NVR Networking

2 NVR Networking
3