Faq - Ganz NR8-32M78 Quick Start Manual

1. Why is the NVR self-test screen frozen?
Use the methods below to fix the problem:
Method 1: Check whether the NVR is equipped with a hard disk.
Method 2: Check whether the NVR is equipped with an unformatted hard disk.
Method 3: Check whether the hard disk is damaged.
If a hard disk is not required, Click continue in the lower right corner of the screen to
resume the startup process.
2. Why does the screen display incomplete information or
is skewed?
Use the following methods below to fix the problem:
Method 1: Use the automatic adjustment function of the monitor.
Method 2: Click Adjust on the login screen. The Monitor Setup screen is displayed.
For operation details, see chapter 4 "Operation Instruction" of the Network Video
Recorder (NVR) User Guide.
3. Why no image is displayed on the monitor?
Use the following methods below to fix the problem:
Method 1: Check the power supply of the monitor.
Method 2: Check whether the monitor is connected to the NVR correctly.
Method 3: Restart the NVR.
4. Why does the network camera can search but can't
connect?
Please make sure that the network camera and NVR are in the same subnet.
22
Network Video Recorder(NVR)
Quick Start Guide
7

FAQ

Issue V1.1 (2016-02-22)