Specifications - Remington iLIGHT Pro Use And Care Manual

Troubleshooting
PROBLEM POSSIBLE
CAUSE
Dirt or debris is The Remington iLIGHT
stuck to the FLASH device needs to be
WINDOW. cleaned.
DO NOT attempt to open or repair your
Remington iLIGHT device. Only authorized
Remington iLIGHT device repair centers
are permitted to perform repairs.
Opening your Remington iLIGHT device
may expose you to dangerous electrical
components and to pulsed light energy,
either of which may cause serious bodily
damage and/or permanent eye injury.
Trying to open your Remington iLIGHT
device may also damage the device and
will void your warranty.
WHAT YOU SHOULD DO
See "After Your Remington iLIGHT
Hair Removal System Treatment" in
the TOC for instructions on how to
clean your device. If you still can't get
your Remington iLIGHT device clean,
contact Customer Service.
See page 48.
Please contact Customer Service on page
48 if you have a broken or damaged
device in need of repair.
46
Contact Information
Customer Service 800-736-4648
Online: www.RemingtonProducts.com
Address: Spectrum Brands, Inc.,
3001 Deming Way
Middleton, WI 53562

Specifications

Spot Size 2cm
Speed 2.25 seconds
Technology Xenon Flash Lamp (IPL)
Max Energy Level 8 J/cm
Wavelength 650-1200 nm
Electrical Requirements 120 VAC
Operation and Safety UL 60335, EN 60335, CSA STD C22.2 No. 60335-1
Package Size 10.125" x 9.625" x 8.3125"
Labeling
EC Declaration of Conformity
2
2 (±20%)
47