Other Treatment Tips; Recommended Treatment Schedule - Remington iLIGHT Pro Use And Care Manual

Using the Remington iLIGHT Hair Removal System for Treatment
® ®
Repeat step 5 until the desired treat-
ment area is fully covered. Depending
on the area, the treatment time will vary.
Note: For faster coverage you may
hold down the FLASH BUTTON while
you lift the HAND PIECE and place it
back in contact with a new area to
be treated. This will cause the unit to
deliver a flash to the skin as soon as
full contact between the skin and the
treatment cap is established.

Recommended Treatment Schedule

Your initial regimen should be spread
out over 1 month to ensure that you
target the most number of active hairs
(including those that recently cycled
from the resting phase).
We recommend that you use the
Remington iLIGHT device once every two
weeks over the span of a month, for a
total of 3 treatments on each area.
If you have redness, blistering or other
skin irritation in the treatment area, DO
NOT perform the treatment. Wait until
the skin returns to normal before using
the device again. If the irritation does
not go away within 3 days, contact
Customer Service. See page 48.
32

OTHER TREATMENT TIPS

• Perform your treatments at night
before going to bed, so that any
lingering redness will most likely
disappear by the morning.
• If you've waxed hair in the treatment
area, wait 6 weeks before using the
Remington iLIGHT device. The device
uses the hair under your skin to
disable your hair at the root, so it
is not effective if the hair has been
pulled out.
• Shave immediately before treating
the area. This will allow you to use a
higher energy level as there's no sur-
face hair to absorb the light energy.
How well you shave will make a
big difference in how the treatment
feels. See Step 1 under "Using the
Remington iLIGHT Hair Removal
System for Treatment" in the TOC.
• Periodically, if the device gets too
hot, the "Hourglass" icon will flash
and the unit will beep. Wait for a few
minutes to allow the device to cool
down. There is no need to shut the
unit down, as the hourglass icon will
disappear when your Remington iLIGHT
device is ready to use again.
• The number of flashes delivered
before the cool down state depends
on several factors, including how fast
you apply the treatments and the
room temperature.
• Use the highest energy level setting
that's comfortable for you and that
does not cause an adverse reac-
tion. Higher energy levels are more
effective. See Step 3 under "Using
the Remington iLIGHT Hair Removal
System for Treatment" in the TOC.
33