Cleaning The Remington Ilight Device - Remington iLIGHT Pro Use And Care Manual

After Your Remington iLIGHT Hair Removal System Treatment
® ®
When your Remington iLIGHT device
session is over, we suggest the
following:
• Be sure to record your treat-
ment using the iLIGHT App or the
TREATMENT CARDS. See TOC.
• Turn the device off by pressing the
POWER SWITCH.
• After each hair removal session, clean
the device, especially the TREATMENT
CAP and FLASH WINDOW (See
"Cleaning Remington iLIGHT Device")
• After cleaning, store the device in
its original box and keep it away
from water.
CLEANING the Remington
iLIGHT Device
Before and after each session, clean
your device, especially the FLASH
WINDOW, the SKIN CONTACT SENSORS,
and the SKIN TONE SENSOR window.
DO NOT place any part of the
Remington iLIGHT device in water
or other liquids. If any part of the
device gets wet, DO NOT USE. Contact
Customer Service for help. See Page
48. As with any electrical device, a wet
Remington iLIGHT device could cause
electrocution or electric shock.
• Make sure the device is turned off.
Remove the POWER CORD from
the device and wall socket
before cleaning.
34
• Use a clean, lint-free cloth (one is
provided with the unit) or a cotton
swab to gently wipe the Remington
iLIGHT device surface and especially
the TREATMENT CAP, FLASH WINDOW,
SKIN CONTACT SENSORS AND THE
SKIN TONE SENSOR window. If need-
ed, you can dampen the cloth or cot-
ton swab with water and mild soap.
Allow the device to dry completely
before using again.
• If you still need to remove dirt or debris,
you can use your fingernail or a firm
piece of plastic like a credit card.
Be careful not to damage the
FLASH WINDOW.
35