Advertisement
5. Loading cards
lid catch
A. Push slider into printer.
While holding stacker, rotate
support-arm away from printer
and carefully drop stacker down.
C. Push cards into position and
close lid.
Slide lid catch to lock lid.
Lift stacker into its upright
position and rotate support-arm
to secure.
6. Applying weight
Position the tool on top of the card stack to serve as a weight
to assist the feeding of the last 30 (approx.) cards.
7. Loading cards during printing
To load cards during printing, feed a stack of about
50 cards through top of stacker.
Reposition tool (weight) onto top of cards.
To load a larger batch of cards, repeat section 5.
IMPORTANT:
slider
support-arm
B. Slide open lid catch and open lid.
D. Pull slider out to its
IF ANY CARDS REMAIN IN THE STACKER,
SLIDER MUST BE PUSHED IN
BEFORE ROTATING SUPPORT-ARM.
Load cards into stacker, ensuring
they lean forward, towards printer.
FULLY EXTENDED position.
Advertisement
