Inserting Cards - Javelin J100i User Manual

1

Inserting Cards

Introduction
Thank you for choosing the Javelin J360i Card Printer.
Cards are inserted one at a time into the slot at the front of the printer.
This manual guides you to efficient start up and operation of your new Card Printer.
The card is printed on the top surface and is ejected through the same slot
Note: Handle the cards only by the edges.
Printer Features
This figure shows the encoding orientation for contact smart-cards and cards with a
magnetic stripe.
The following shows the main functional features found on your J360i Printer.
If printing is desired on the side of the magnetic-stripe, the card should be inserted with the
stripe on the top surface and to the right.
For contactless smart-cards, orientation is not important.
STRIPE ON UNDERSIDE
AND TO THE RIGHT
13
2