Table of Contents
Advertisement
Loading Cards
To help you load, print and collect cards, the printer has a card feeder & output hopper
The card feeder is used for loading cards, it can hold up to 100 (30mil) cards.
Note:
DO NOT bend cards or touch print surfaces as this can reduce print quality.
The surface of the cards must remain clean and dust free. Always store cards in
an enclosed container. Ideally, use cards as soon as possible. If cards stick
together, carefully fan or shuffle them.
For cards with magnetic stripe refer to appendix A for loading instructions.
Load cards into card feeder as follows:
1
Open card feeder cover.
2
Slide card guide all the way to the right until it locks in place with an audible click.
3
Remove wrapper from card stack.
4
Place stack of up to 100 cards into the card feeder and close the cover.
When card feeder cover is closed, the card guide locking mechanism will
automatically be released.
12
Advertisement
Table of Contents
