Suzuki LT-A50 Service Manual page 57

• Install the lever assembly to the cover.
• Apply THREAD LOCK "1342" to the nut 1.
" 99000-32050: THREAD LOCK "1342"
• Install the reel in the cover.
• Install the return spring to the cover so that the rachet is pushed
inward.
• Apply SUZUKI SUPER GREASE "A" to the return spring 2.
For USA
( 99000-25030: SUZUKI SUPER GREASE "A"
For the others
( 99000-25010: SUZUKI SUPER GREASE "A"
• Install the lever on the rachet.
• Install the washer and circlip 3.
• Confirm that the lever 4 touches the lever guide 5 and pushes
the rachet 6 outward when the end of the lever guide is pushed
to the case and the starter rope is pulled slowly.
• Remove the cap 7 from the recoil starter grip.
• Untie a knot at the rope.
• Turn the rope on the real properly.
ENGINE 3-27