Turning Off The Projector; How To Operate The On-Screen Menu - Christie LHD700 Quick Reference Manual

Turning Off the Projector

1
Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote
control, and Power off? appears on the screen.
2
Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote
control again to turn off the projector. The LAMP/SHUTTER indicator lights bright and the
POWER indicator turns off. After the projector is turned off, the cooling fans operate for 90
seconds. You cannot turn on the projector during this cooling down period.
3
When the projector has cooled down enough, the POWER indicator lights green and then you
can turn on the projector.
Note:
Do not put the projector in a case before the projector is cooled enough.

How to Operate the On-Screen Menu

The projector can be adjusted or set via the
On-Screen Menu. For each adjustment and setting
procedure, refer to the respective sections in this
manual.
1
Press the MENU button on the side control
or the remote control to display the On-
Screen Menu.
2
Use the Point
▲▼
select a main menu item. Press the Point
or the SELECT button to access the
►
submenu items. (The selected item is
highlighted in orange.)
3
Use the Point
▲▼
desired submenu item and press the
SELECT button to set or access the selected
item.
4
Use the Point
▲▼◄►
the setting or switch between each option
and press SELECT button to activate it and
return to the submenu.
5
Press the Point
◄
main menu. Press the MENU button again to
exit the On-Screen Menu.
buttons to highlight or
buttons to select the
buttons to adjust
button to return to the
On-Screen Menu
Point
The currently
► or SELECT
set item is
button
marked.
16
The selected item is
highlighted in orange.
020-000424-01 Rev.1 (11-2011)