Table of Contents
Advertisement
0 VIBRATING PRESSER FOOT AND LIFTING PRESSER FOOT AND NEEDLE TIMING ADJUSTMENT
*
When the needle descends, the lifting presser foot must touch the feed dog before the needle point reaches the feed
dog. When the needle drops, the needle point must clear the feed dog before the lifting presser foot rises.
When the needle goes down.
Needle
Feed dog
When the needle goes up.
Needle
Feed dog
1.
Loosen two screws O-
2. Adjust vibrating presser foot O. lifting presser foot O and needle timing byturning byturning upper feed eccentric
wheel O-
•
After the adjustment, tighten screws O securely.
0
UPPER FEED ADJUSTMENT
*
This machine is assembled so that upper feed (needle feed) matches lower feed. (The reference line on the needle feed
rock crank matches the reference line on the collar.)
*
If the upper and lower feeds do not match, increase or decrease upper feed as follows to match sewing conditions.
0
1.
Loosen nut O-
2. To decrease upper feed, move nut O toward feed driving shaft ©.
3. To increase upper feed, move nut O toward the tip of needle feed rock crank O-
*
After the adjustment, tighten nut O securely.
- 6 5 -
Upper feed
Lower feed
Hide quick links:
Advertisement
Table of Contents
