Feed Adjustment - Brother XL-6060 Series Service Manual

20.

FEED ADJUSTMENT

STANDARD
When the feed dial is 2, the feed distance for left straight line sewing should be 1.8-2.2 mm for 10 pitch.
ADJUSTMENT
1. Turn the selection dial to left straight line sewing, then set the feed dial to 0.
2. Loosen the adjustment screw nut.
3. Turn the adjustment screw to set the feed distance to 1.8-2.2 mm.
4. Tighten the adjustment screw nut.
Adjustment Points
3. Adjust by moving the feed dial gear position left and right so that when normal paper is laid under the
presser foot and the balance wheel is rotated by hand 11 rotations (10 pitch) in the forward direction, the
distance that the normal paper is fed is 1.8-2.2 mm.
If the 19. SUPER PATTERN adjustment is not executed before the FEED ADJUSTMENT, the FEED
ADJUSTMENT will need to be executed again after the 19. SUPER PATTERN adjustment.
XL-6040
Feed dial
XL-6060
XL-6050
www.promelectroavtomat.ru
-48-
Adjustment nut