Floppy Configuration - Advantech SOM-5787 User Manual

SATA#2 Configuration
This item allows you to select Disabled / Enhanced.
Primary/Secondary/Third IDE Master
BIOS auto detects the presence of IDE device, and displays the status of auto
detection of IDE device.
– Type : Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]
– LBA/Large Mode : Enables or Disables the LBA mode.
– Block (Multi-Sector Transfer) : Enables or disables data multi-sectors trans-
fers.
– PIO Mode : Select the PIO mode.
– DMA Mode : Select the DMA mode.
– S.M.A.R.T. : Select the smart monitoring, analysis, and reporting technology.
– 32Bit Data Transfer : Enables or disables 32-bit data transfer.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out (Sec)
This item allows you to select the time out value for detecting ATA/ATAPI
device(s).
3.3.3

Floppy Configuration

Floppy A/B
Select the type of floppy drive, if any, connected to the system. We suggest you
disable the floppy if installing Windows Vista without a floppy drive.
SOM-5787/6787 User Manual
Figure 3.6 Floppy Configuration
14