Function And Control; Remote Controller Description - Gree GWH18PD-K3NNA1A Service Manual

6. Function and Control

6.1 Remote Controller Description

Names and Functions of Wireless Remote Control
Note: Be sure that there are no obstructions between receiver and remote controller ;Don't drop or throw the remote control; Don't let
any liquid in the remote control and put the remote control directly under the sunlight or any place where is very hot.
Remote control
ON/OFF
but the presetting time is still remained.
MODE
16
Signal transmitter
ON/OFF button
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
MODE button
Press this button, Auto, Cool, Dry, Fan,
Heat mode can be selected circularly.
Auto mode is default while power on.
Under Auto mode, the temperature will not
b e d s i p a l y e ; d U n d r e H e t a
o
; Under other
( 82 F)
initial value is 28
modes, the initial value is 25
AUTO DRY
COOL FAN
HEAT
(Only for cooling and heating unit.
As for cooling only unit, it won't
have any action when it receives
the signal of heating operation.)
SLEEP
FAN
CLOCK
m o d , e h t e
o
( 77 F) .
LIGHT
SLEEP button
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will di splay. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
FAN button
Press this button, Auto, Low, Middle, High
speed can be circ ul arly selecte d. Aft er
powered on, Auto fan speed is default.
AUTO
Low fan
High fan
Note:Under the Dry mode, the fan speed isn't
adjustable, low fan speed is imperative,
but when op erating this button, the wireless
adjustable, low fan speed is imperative,
CLOCK button
Press this button, the clock can be set up,
signal blink and display. Within 5
seconds, the value can be adjusted by
pressing + or - button, if continuously
press this button for 2 seconds above,
in every 0.5 second s, the value on ten place
of Minute will be increase d 1. During blin king,
repress the Clock button, signal
constantly displayed and it denotes the
setting succeeded. After powered on, 12:0 0
is defaulted to display and signal
be displayed. If there is signal
displayed that denotes the current time
value is Clock value, otherwise is Timer value.
LIGHT button
Press this button to select LIGHT on or off
in the displayer. When the LIGHT on is
set,the icon will be displayed and the
indicator light in the displayer will be on.
When the LIGHT off is set, the icon
be displayed and the indicator light in
the displayer will be off.
Function and Control
Middle fan
will be
will
be
will