Gree GWH09YC-K6DNA1A/I Owner's Manual

Hide thumbs

Table of Contents

Quick Links

Change for life

Owner's Manual

Original Instructions

Split Air Conditioner

CONTENTS

Safety precautions

......................................................................................

Parts name

..................................................................................................

Operation and introduction of remote contr oller

Clean and maintenance

Checked items before maintenance

Installation notice

.........................................................................................

Installation of indoor unit

Test and operation

.......................................................................................

Configuration of connection pipe

Thank you for choosing our product.

Please read this Owner's Manual carefully before operation and

retain it for future reference.

If you have lost the Owner's Manual, please contact the local agent

or visit www.gree.com or send an email to global@cn.gree.com for

the electronic version.

NOTE：

Actual product may be different from graphics,

please refer to actual products.

.............................................................................. .

.............................................................

..............................................................................

..................................................................

............................................

Table of Contents

Summary of Contents for Gree GWH09YC-K6DNA1A/I

Page 1: Table Of Contents
Please read this Owner’s Manual carefully before operation and retain it for future reference. If you have lost the Owner's Manual, please contact the local agent or visit www.gree.com or send an email to global@cn.gree.com for the electronic version. NOTE：...
Page 2 GWH09YC-K6DNA1A/I GWH09YC-K6DNA2A/I GWH09YC-K6DNA1Z/I GWH09YC-K6DNA2Z/I GWH09YD-S6DBA1A/I GWH09YD-S6DBA2A/I GWH12YC-K6DNA1A/I GWH12YC-K6DNA2A/I GWH12YC-K6DNA1Z/I GWH12YD-S6DBA2A/I GWH12YD-S6DBA1A/I GWH18YD-K6DNA1A/I GWH18YD-K6DNA1Z/I GWH18YD-K6DNA2A/I GWH18YE-S6DBA2A/I GWH18YE-S6DBA1A/I GWH24YE-K6DNA1A/I GWH24YE-K6DNA2A/I GWH24YE-K6DNA1Z/I GWH24YE-S6DBA2A/I GWH24YE-S6DBA1A/I...
Page 3 Explanation of Symbols WARNING This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage to CAUTION property. Indicates important but not hazard-related information, used NOTICE to indicate risk of property damage. Exception Clauses Manufacturer will bear no responsibilities when personal injury or property loss is caused by the following reasons.
Page 4 The refrigerant This appliance is not intended for use by persons Before install the Appliance filled (including children) with reduced physical, sensory appliance, read with flammable t i l i rience an d the installation gas R32. knowledge, unless they have been given superv- manual first.
Page 5 Safety operation of flammable refrigerant Installation notes Check whether there is fire source or potential fire source in the maintenance area. The air conditioner must be installed in a room - The naked flame is prohibited in the mainte- that is larger than the minimum room area. The nance area;...
Page 6: Safety Precautions
Safety precautions WARNING Installation Installation or maintenance The grounding resistance must be performed by qua- should comply with nation- lified professionals. al electric safety regula- The appliance shall be in- tions. stalled in accordance with Air Conditioner should be national wiring regulations. properly grounded.
Page 7 Safety precautions CAUTION Installation Instructions for installation For the air conditioner with- and use of this product are out plug, a circuit breaker provided by the manufac- must be installed in the turer. line. Select a location which is The yellow-green wire in out of reach for children air conditioner is ground- and far away from animals...
Page 8 Safety precautions WARNING Operation and Maintenance tioner to multi-purpose soc- This appliance can be used ket. Otherwise, it may cau- by children aged from 8 se fire hazard. years and above and per- Do disconnect power supp- sons with reduced physi- ly when cleaning air condi- cal, sensory or mental ca- tioner.
Page 9 Safety precautions CAUTION Operation and Maintenance frequently. Do not spill water on the re- Air conditioner gives off mote controller, otherwise burning smell. the remote controller may Indoor unit is leaking. be broken. Do not use fire or hair dry- er to dry the filter to avoid deformation or fire hazard.
Page 10: Parts Name
Parts name Indoor Unit If remote controller is lost or damaged, please use aux. button to turn on or turn off the air conditioner. The operation in details is as below: As shown in the figure, open panel and press aux. button to turn off the air conditioner. When the air conditioner is turned on, it will operate under auto mode.
Page 11: Operation And Introduction Of Remote Controller
Operation and introduction of remote controller Introduction for icons on display Buttons on remote controller screen I feel Set fan speed Turbo mode Send signal Auto mode Cool mode Dry mode Fan mode Heat mode Sleep mode 8°C heating function Health mode Scavenging function TURBO...
Page 12 Introduction for buttons on ● This function indicates that moisture on evaporator of remote controller indoor unit will be blowed after the unit is stopped to NOTE avoid mould. ● This is a general use remote controller. It could be ●...
Page 13 button button TIMER OFF TIMER ON Press this button to set left & right swing angle cycling ● Timer On setting: Signal "ON" will blink and display, signal will conceal, the numerical as below: section will become the timer on setting status. During 5 seconds blink, by pressing + or - button to adjust the time value of numerical section, every press of that button, the value will be...
Page 14 NOTE NOTE ● This function is only available for some models. ● Outdoor temperature display is not available for some models. At that time, indoor unit receives " " button QUIET signal, while it displays indoor set temperature. Press this button, the quiet status is under the auto quiet mode (display "...
Page 15 (4) When setting the initial temperature 30°C, under NOTE this temperature setting, after 7hours, the tem- ● In the above presetting or enquiry procedure, if perature will be decreased 1°C, after that the unit continuously within 10s, there is no button pressed, will keep on running under this temperature;...
Page 16 3 speed or quiet mode according to the compari- About swing left and right son between indoor ambient temperature and set 1. Press swing left and right button continuously temperature. more than 2s, the main unit will swing back and forth Under dry, fan mode: indoor fan operates at quiet from left to right, and then loosen the button, the unit mode.
Page 17 Replacement of batteries in remote controller battery reinstall remove Cover of battery box Press the back side of remote controller marked with " ", as shown in the fig, and then push out the cover of battery box along the arrow direction.
Page 18: Clean And Maintenance
Clean and maintenance WARNING ■ The filter should be cleaned every three months . If there is much dust in the operation environme- WARNING nt, clean frequency can be increased. ■ Turn off the air conditioner and disconnect the ■ After removing the filter, do not touch fins to power before cleaning the air conditioner to av- avoid injury.
Page 19: Checked Items Before Maintenance
Checked items before maintenance Phenomenon Solution Check items Whether there’s od- General phenomenon analysis Eliminate the odour Odours are our source, such as source. Clean the Please check below items before asking for furniture and cigare- emitted filter. maintenance. If the malfunction still can’t be tte, etc.
Page 20: Installation Notice
Installation notice WARNING sure that the unit is running in cooling mode. Then, fully close the valve at high pressure side (liquid valve). About 30-40 seconds later, fully close the valve at low pressure side (gas valve), immediately stop the unit and disconnect power.
Page 21 Selection of installation location Requirements for electric connection Basic requirement 7.If the supply cord is damaged, it must be repla- Installing the unit in the following places may cau- ced by the manufacturer, its service agent or se malfunction. If it is unavoidable, please consu- similarly qualified persons in order to avoid a lt the local dealer: hazard .
Page 22: Installation Of Indoor Unit
Installation of indoor unit NOTE Indoor outdoor ● Pay attention to dust prevention Step 1: sures when opening the hole. Choose installation location Φ55 5-10 Φ70 Recommend the installation location to the client and then confirm it with the client. Step 2: Step 4: Install wall-mounting frame...
Page 23 drain hose Hex nut diameter Tightening torque (N m) 15~20 30~40 45~55 insulating pipe NOTE 70~75 Add insulating pipe in the indoor drain hose in order Wrap the indoor pipe and joint of connection pipe with insulating pipe, and then wrap it Step 7: with tape Connect wire of indoor unit...
Page 24 drain hose connection pipe Remove the wire clip; connect the power conn- band ection wire to the wiring terminal according to the color; tighten the screw and then fix the po- wer connection wire with wire clip. indoor power cord Bind them evenly.
Page 25: Test And Operation
Test and operation Check after installation ● Check according to the following requirement after finishing installation. Items to be checked Possible malfunction Has the unit been The unit may drop, shake or installed firmly? emit noise. It may cause insufficient Have you done the refri- cooling(heating) capacity.
Page 26: Configuration Of Connection Pipe
Configuration of connection pipe Additional refrigerant charging amount for R32 Standard length of connection pipe: 5m, 7.5m, Min. length of connection pipe. For the unit with standard connection pipe of 5m, there is no limitation for the min length of con- nection pipe.
Page 27 B: Remove the burrs smooth surface Remove the burrs with shaper and prevent the ● burrs from getting into the pipe. improper expanding pipe shaper leaning damaged crack uneven surface thickness downwards the length is equal Working temperature range Indoor side Outdoor side C: Put on suitable insulating pipe DB/WB(°C)
Page 28 GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: global@cn.gree.com Web: www.gree.com 600005060132...

Gree GWH09YC-K6DNA1A/I Owner's Manual

Quick Links

Related Manuals for Gree GWH09YC-K6DNA1A/I

Summary of Contents for Gree GWH09YC-K6DNA1A/I

This manual is also suitable for:

Table of Contents