Gree GWH18PD-K3NNA1A Service Manual page 64

Removal Procedure
Steps
4. Remove front panel and rear guard grille
Remove screws fixing the front panel and
the rear guard grille respectively, and then
remove the front panel and the rear guard
grille.
5. Remove right side plate
Remove screws connecting the front panel
with the chassis and the motor support,
and then remove the right side plate.
6. Remove axial flow blade
Remove nut fixing the blade and then
remove the blade.
Procedure
panel
screw
screw
axial flow blade
nut
rear guard grille
right side plate
screw
screw
61