Fax Settings - Header/Footer Position - Konica Minolta bizhub C360 User Manual

10.5 Administrator Settings (IP/I-FAX)
10.5.7

Fax Settings - Header/Footer Position

Reference
-
d
For the setting procedure, refer to page 10-15.
10.5.8 Fax Settings - Line Parameter Setting (IP)
Number of Redials
d
For the setting procedure, refer to page 10-17.
Redial Interval
d
For the setting procedure, refer to page 10-17.
10.5.9 Fax Settings - TX/RX Settings
Reference
-
-
-
-
d
For the setting procedure, refer to page 10-19.
10.5.10 Fax Settings - Function Settings
Function ON/OFF Setting - Destination Check Display Function
d
For the setting procedure, refer to page 10-21.
Memory RX Setting
d
For the setting procedure, refer to page 10-22.
10.5.11 Fax Settings - Report Settings
Activity Report
d
For the setting procedure, refer to page 10-27.
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
For IP Address Fax in the color mode, reception information is not available for [Outside Body Text].
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.
Reference
Reference
Reference
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to [Auto].
The available tray types vary depending on the options that are installed.
To receive a fax in the color mode, documents are always recorded in full size for IP address fax, and
recorded after being reduced to the appropriate print paper size for Internet fax.
To receive a fax in the color mode, Print Separate Fax Pages cannot be used.
Reference
Reference
Reference
Reference
10
10-34