Konica Minolta bizhub C360 User Manual page 290

13.5 Fax Glossary
Term
Transmission source
record
Transmission time
TSI
V34
Z-Folded Original
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
Description
The transmission time, name, telephone number, page number, and other infor-
mation on the sender's side printed at the edge of the document on the receiver's
side.
The time needed to send a fax. The higher the resolution or larger the paper, the
longer the transmission takes.
The acronym for Transmitting Subscriber Identification, which is the ID of a fax
transmission terminal.
A communication mode used for super G3 fax transmission. Super G3 mode
transmission may not be activated because of a telephone line status where the
receiver's or sender's machine is connected to a telephone line via a private
branch exchange switchboard. If this occurs, the G3 mode should be disabled by
turning V34 off.
This function first determines the document size that cannot be detected correct-
ly because of folds, then scans and sends the document after the verification.
This function is available only when a document is scanned by ADF.
13
13-14