Konica Minolta bizhub C360 User Manual page 184

9.2 One-Touch/User Box Registration
2/3 page
3/3 page
Item
[No.]
[Name]
[User ID]
[Password]
[Host Address]
[File Path]
[Proxy]
[SSL Settings]
[Port Number]
[Index]
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
Description
Press [No.], and then enter the registration number of the destination be-
tween 1 and 2,000. Press [OK] without entering any number to register the
smallest number available.
Use the touch panel to enter the name to be registered in the address book
using up to 24 characters.
Enter the user ID for logging into the destination computer via the touch panel
(up to 63 bytes).
Enter the password for logging into the destination computer via the touch
panel (up to 63 characters).
Enter the host name, IPv4 address or IPv6 address as the host address for
the destination server.
The host name must be less than 63 characters in length.
• If you enter a host name and then select to enter an IP address, the host
name is cleared.
• If you enter the IP address and then press [Input Host Name], the IP ad-
dress is saved and displayed in the input screen.
• Before entering the host name, check that the DNS settings are correctly
specified. For details, refer to the [User's Guide Network Administrator].
Enter the destination file path for saving data via the touch panel (up to 142
bytes).
Select whether or not a proxy server is used.
Select whether to enable SSL.
Enter the port number (any number between 1 and 65535).
Select the index. For a frequently used destination, specify the index charac-
ters and select [Favorites] at the same time. This allows you to find it more
easily.
9
9-15