Mounting Or Removing Of Arm Supports - Vermeiren V100 Instruction Manual

To apply the brakes:
1. Push the brake handles forward till you feel a distinctive click.
CAUTION:
Risk of unintended movement – Make sure the wheelchair is on a
flat horizontal surface before releasing the brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle backwards.
2. Hold the hand-rim of the release wheel with your hand.
3. Release the second brake by pulling the handle backwards.
2.6

Mounting or removing of arm supports

The arm supports of the wheelchair can be mounted by following instructions.
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
bottom side of the arm support.
1. Mount the rear tube of the arm rest in tube
c
hood .
2. Make sure the arm support clicks in the
locking mechanism.
3. Fold the arm rest forward.
4. Click the front tube of the arm rest in tube
d
hood .
ƒ‰‡
V100
2011-01