Ford 2003 Mustang Workshop Manual page 1407

Hide thumbs Also See for 2003 Mustang:

Table of Contents

25. Separate the fuel charging wiring harness from the fuel injection supply manifold in four places

and position the harness aside.

26. Remove the ten bolts and the intake manifold, and the supercharger and fuel supply manifold

as an assembly.

27. NOTE: Inspect the intake manifold gaskets and install new gaskets, if necessary.

NOTE: Install new bypass tube O-rings and lubricate them, using premium engine coolant.

To install, reverse the removal procedure.

Tighten the intake manifold bolts in the sequence shown.

Show Quick Links

Table of Contents