Descaling Procedure - Saeco Incanto HD8917 Manual

English
28

Descaling procedure

START
CALC
CLEAN
1 Pour the contents of the milk circuit cleaner sachet in the milk carafe.
Then fill the milk carafe with water up to the MAX level indication.
2 Insert the milk carafe into the machine and place a container under the
milk froth dispensing spout.
3 Press the MENU button, select ' Drinks' and scroll to milk froth. Press the
OK button to start dispensing the cleaning solution.
4 Repeat step 3 until the milk carafe is empty.
5 When the carafe is empty, remove the container and the milk carafe from
the machine.
6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX
level indication.
7 Insert the milk carafe into the machine.
8 Place the container under the milk froth dispensing spout.
9 Press the MENU button and select milk froth in the special drinks menu
to start the carafe rinsing cycle.
10 Repeat step 9 until the milk carafe is empty.
Note: Never drink the solution dispensed during this step
11 Repeat step 6-10.
12 When the machine stops dispensing water, the cycle is finished.
13 Disassemble all the components and rinse them under a lukewarm tap.
The machine is ready for use.
When the display shows 'start calc clean', you need to descale the machine.
If you do not descale the machine when this message appears on the
display, the machine stop working properly. In that case, repairs are not
covered by the guarantee.
Only use Saeco descaling solution to descale the machine. Saeco descaling
solution is designed to ensure optimal performance of the machine. The use
of other products may damage the machine and leave residues in the water.
You can buy Saeco descaling solution in the online shop at
www.shop.philips.com/service. The descaling procedure lasts 30 minutes
and consists of a descaling cycle and a rinsing cycle. You can pause the
descaling or rinsing cycle by pressing the ESC button. To continue the
descaling or rinsing cycle, press the OK button.
Note: Do not remove the brew group during the descaling
procedure.Warning: Do not drink the descaling solution or the
water dispensed during the descaling procedure.
1 Remove the drip tray and the coffee grounds container, empty and clean
them and put back into place.
2 Place a large container (1.5 l) under the coffee dispensing spout.
3 When the display shows 'START CALC CLEAN', press the OK button to
start the descaling procedure.Remove the hot water dispensing if
present.