Saeco Incanto HD8917 Manual page 27

English
26
1 2
3
4
5
2
1
1
2 Remove the lid of the milk carafe.
3 Lift the milk froth dispensing spout out of the top of the carafe.
4 Remove the suction tube from the milk froth dispensing spout.
5 Rinse the suction tube with lukewarm tap water thoroughly.
Weekly cleaning of the milk carafe
The milk froth dispensing spout consists of 5 components. Disassamble all
components once a week to clean them.
1 Suction tube
2 Rubber support
3 Milk frother
4 Milk frother connection
5 Dispensing spout lid
Disassembling the milk carafe
1 Press the release buttons on both sides of the top of the milk carafe (1)
and lift the top off the milk carafe (2).
2 Turn the dispensing spout lid upside down and hold it firmly in your
hand. Pull the suction tube off the rubber support.