Cleaning The Brew Group - Saeco Incanto HD8917 Manual

English
22
1
1
2

Cleaning the brew group

1
2
- The drip tray is full when the drip tray full indicator pops up through the
drip tray. Empty and clean the drip tray every day.
1 Press the release buttons on both sides of the drip tray (1) and pull the
drip tray out of the machine (2).
2 Remove and empty the coffee grounds container.
3 Empty and rinse the drip tray under the tap.
4 Place the coffee grounds container back in the drip tray.
5 Slide the drip tray back into the machine until it locks into position with a
click.
Note: Make sure that the machine is still switched on when you remove the
drip tray. If you switch off the machine before you remove the drip tray, the
'empty coffee grounds container' icon will be visible on the display when
you switch on the machine again, even though the drip tray is empty.
Cleaning the water tank
1 Remove the water tank from the machine and rinse it with fresh water
periodically.
2 Fill the water tank with fresh water up to the MAX level indication and
place it back in the machine.
Cleaning the coffee compartments
- Clean the bean hopper with a dry cloth once a month.
- If necessary, clean the pre-ground coffee compartment with a dry cloth.
Weekly cleaning of the brew group
1 Switch off the machine and unplug it.
2 Remove the drip tray with the coffee grounds container.
3 Empty the drip tray and rinse it under the tap.
4 Empty the coffee grounds container and rinse it under a lukewarm tap.
5 Open the service door.
6 Press the PUSH button (1) and pull at the grip of the brew group to
remove it from the machine (2).