Table of Contents
Advertisement
The following table provides descriptions of the LED statuses
and their meaning.
LED
Status Color
Power
100Mbps
LNK /ACT
FDX/COL
Rear Panel
The Rear Panel of the 8-Port Switch consists of 8x 10/100 N-Way
UTP switch ports, and one DC power connector.
Figure 2-4. The Rear Panel of the 8-Port Switch
??RJ-45 Ports: 8x 10/100N-Way auto-sensing for 10Base-T
or 100Base-TX connection.
On
Green
The power of the Switch is On
On
Green
The port is connecting with 100Mbps.
The connection between the Switch and
Off
the device is 10Mbps, if the LINK/ ACT
light is on.
The port is successfully connecting with
On
Green
the device.
Blinks
The port is receiving or transmitting data.
Off
No device attached.
The port is operating in Full-duplex
On
Yellow
mode.
Collision of Packets occur s in the port.
Blinks
No device attached or in half-duplex
Off
mode.
5
Description
Advertisement
Table of Contents
