Completion Notice Function; Setting Up The Completion Notice - Panasonic DP-8060 Operating Instructions Manual

Setting Up

Completion Notice Function

■ Setting up the Completion Notice

Ex: Copy Job
Basic Procedures:
1
Install the Job Status Utility and
Communications Utility, located on the
Panasonic Document Management
System CD-ROM.
2
Confirm that the Job Status Utility
icon
Panasonic Job Status Utility Icon
●
If the Job Status Utility icon
shown on the task bar, select "Start" → → → → →
"All Programs" → → → → → "Panasonic" → → → → → "Job
Status Utility" → → → → → "Job Status Utility" to
activate the Job Status Utility icon.
3
For PC Fax and PC Print only
Setup the Completion Notice as
described in the column on the right.
For Copy, Fax, and Internet Fax only
1
Register your PC address with the
Communications Utility, refer to the
Registering your PC address information
onto the device (See page 26).
2
Select your PC on the Touch Panel Display
of the machine, refer to the Operating
Instructions (For Copy & Function
Parameters), or (For Facsimile and Internet
Fax/Email Functions) on the provided CD-
ROM.
32
The Job Status Utility software will display the pop-up Completion Notice
on your PC screen when finishing the Print, PC Fax, Copy, and Fax jobs.
The information displayed in the Completion Notice vary according to the
type of job being performed.
(See pages 7-18)
is shown on the task bar.
is not
Setting up for PC Fax, and PC Print:
1
Right-click the Job Status Utility
icon on the task bar, and select
"Setup" from the menu.
Panasonic Job Status Utility Icon
2
Choose the display condition for the
Setup window, and then select
"OK".
All : Always displays after each
transmission, or print job.
Error only : Displays only when an error
occurs.
None : Does not display.