Panasonic DP-8060 Operating Instructions Manual page 6

Network Configuration
Setting up the Network Configuration
1 1
Enter the Gateway Address, and
then select "OK".
Ex: 192.168.1.111
1
●
When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
" " key on the Control Panel to enter a
period after the number.
●
To correct a mistake, press "
the cursor to the 1st digit of the incorrect
address.
To delete, press "Clear", and re-enter the
correct address.
6
2
" to move
12
Press the Reset key.
13
Turn the Power Switch OFF (
and then back ON ( ) again.
●
The Power Switch is on the left side of the
machine.
),