Completion Notice; Setting Up The Completion Notice - Panasonic DP-C262 Operating Instructions Manual

Completion Notice

■ Setting up the Completion Notice

Ex: Copy Job
Basic Procedures:
1
Install either the Printer Driver with
Job Status Utility, or Fax Driver
located on the Panasonic Document
Management System CD-ROM.
(See pages 7-35)
2
Confirm that the Job Status Utility
icon is shown on the task bar.
Panasonic Job Status Utility Icon
●
If the Job Status Utility icon
shown on the task bar, select "All
Programs" A A A A A "Panasonic" A A A A A "Job
Status Utility" A A A A A "Job Status Utility" A A A A A
to activate the Job Status Utility icon.
3
For PC Fax and PC Print only
Setup the Completion Notice as
described in the column on the right.
For Copy, Fax and Internet Fax only
1 Refer to "Setting up the Scanner
Configuration using the Communications
Utility". (See page 37)
2
Select your PC on the Touch Panel Display
of the machine, refer to the Completion
Notice of each relevant Operation
Instructions on the provided CD-ROM.
The Job Status Utility software is automatically installed when installing
either the Printer with Job Status Utility or Fax Driver.
The Job Status Utility software will display the pop-up Completion Notice
on your PC screen when finishing the Print, PC Fax, Copy and Fax jobs.
The information displayed in the Completion Notice vary according to the
type of job being performed.
Setting up for PC Fax and PC Print:
1
Right-click the Job Status Utility
icon
"Setup" from the menu.
2
Choose the display condition for the
Setup window, and then select
"OK".
is not
All
Error only : Displays only when an error
None
on the task bar and select
Panasonic Job Status Utility Icon
: Always displays after each
transmission or print job.
occurs.
: Does not display.
45