Completion Notice - Panasonic Workio DP-C262 Operating Instructions Manual

Completion Notice

If Completion Notice is set, you will be notified on your computer when copying is completed.
Before using this function, install the Panasonic Document Management System and PCL Printer Driver,
and then configure each software.
To register the IP Address of your computer, refer to Network Scanner Settings (Option) in the Operating
Instructions (For Setting Up) of provided booklet and Completion Notice in the Operating Instructions (For
PCL Printer Driver) on the provided CD-ROM.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select the copy features if necessary.
4
Select "Completion Notice".
5
Select an index tab or "Favorites" to
display the registered computers.
6
Select a designated computer, and
then select "OK".
7
Enter the desired number of copies.
8
Select the Start key.
A completion notice will be sent to the
specified computer when copying is
completed.
When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
37