General Installation Overview - Panasonic DP-8060 Operating Instructions Manual

General Installation Overview

Follow the guidelines in this booklet when setting up the machine, and installing each software. Please read all
procedures completely before attempting to setup this machine.
1
Turning the Power Switches ON.
1
Connect all Cables, and the Power Cord
to the machine.
●
Parallel Cable is used for Local Printer
connection.
Telephone Cable is used for connecting the
optional Fax Communication Board (Order
Number: DA-FG600) to the telephone line.
2
Turn ON ( ) the Main Power Switch first,
and then turn ON ( ) the Power Switch.
Main Power Switch : Rear of the machine.
Power Switch
Power Switch
2
Telephone
Line Cable
External
Telephone
Cable
: Left side of the machine.
Main Power Switch
2
Setting up the Network Configuration.
Setup the Network Configuration using the
Control Panel of the machine. (See pages 4-6)
●
3
Parallel
Installation
Cable
■ Installing the Printer, and
LAN
Cable
■ Parallel Port Printer Connection
■ Fax Driver
4
Setting up
■ Configure the Shared Setting for
■ Setting up your Client PC.
■ Setting up the Scanner Configuration
■ Email/Internet Fax Function Setup on
Network Configuration should be setup by
the System Administrator.
Application Software
Applications selected from the Software
Selection screen will be automatically
installed. (See pages 7-11)
The installation procedure of Printer Driver
for the Network Port Connection for your
Network Print Server PC is explained below
as an example.
Installing the Printer Driver onto the Parallel
Port. (See pages 12-15)
Installing the Fax Driver on your PC.
(See pages 16-18)
Optional Fax Communication Board is
required. (Order Number: DA-FG600)
the Network Print Server.
Windows NT Server
Windows 2000 Server
Windows Server 2003
(See pages 19-24)
Connecting the Shared Setting on the
Network Print Server. (See page 25)
using the Communications Utility.
When using the Network Scanner function.
(See page 26)
the Network
Configuration using the Control Panel of
the machine. (See pages 27-31)
●
Network Configuration should be setup
by the System Administrator.