When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting a channel
4
Setting the Clock
Mode
5
View the HD
Connection Guide
6
Enjoy the TV.
If You Want to Reset This Feature...
O
메뉴m → Setup → Plug & Play → ENTERE
[BOOK-PC7000]Web Manual-Eng.indb 7
Connecting to an Antenna
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
Press the l or ▶ button, then press the ENTERE button.For more information, for more
information, refer to Channel → Auto Program (p. 14).
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Manual: Allows you to manually set the current date and time (p. 23).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
for 5 sec.
메뉴
Cable
ANT OUT
전원
P
7
English
2010-06-21 오전 10:31:35