Setting the Time
메뉴m → Setup → Time → ENTERE
■ Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
Available only when Clock Mode is set to
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Using the Sleep Timer
메뉴m → Setup → Time → Sleep Timer →
■ Sleep Timer
a preset period of time. (30, 60, 90, 120, 150 and 180
To cancel the Sleep Timer, select Off.
[BOOK-PC7000]Web Manual-Eng.indb 23
: Automatically shuts off the TV after
Setting the On / Off Timer
메뉴m → Setup → Time → Timer 1 → ENTERE
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Channel (when the Source is set to TV): Select the
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
When there is only one photo file in the USB,
the Slide Show will not play.
If a folder name is too long, the folder cannot be
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
2010-06-21 오전 10:31:48