Download  Print this page

Connecting To An Antenna; Plug & Play (initial Setup) - Samsung PS50C687 User Manual

Hide thumbs

Advertisement

Table of Contents
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and antenna.
The PDP device may interfere with an amateur radio or AM radio.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo or
Home Use
3
Selecting a country
4
Selecting an antenna
5
Selecting a channel
6
Setting the Clock Mode
7
Time Zone
8
Viewing the HD Connection
Guide.
9
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
• Select the Home Use mode. Store Demo mode is for retail environments.
• To return the unit's settings from Store Demo to Home Use (standard): Press
the volume button on the TV. When the OSD volume is displayed, press and hold
MENU
for 5 sec.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
After selecting the country in the Country menu, some models may proceed with an additional option to
setup the pin number.
When you input the PIN number, 0-0-0-0 is not available.
Press the ▲ or ▼ button, then press the ENTERE button.
Select Air, Cable or Satellite.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you
to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel →
Auto Store (p. 13).
When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite
channels is displayed.
When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable
channels is displayed.
Press the ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
Press the ▲ or ▼ button to select the your time zone, then press the ENTERE button. (depending on the
country)
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Satellite Antenna
VHF/UHF Antenna
Cable
or
ANT OUT
POWER
P
English
7

Advertisement

Chapters

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: