Completion Of Operations - Minelab F3 compact Operation Manual

F3 COMPACT Version 2 Operations Manual
4.8

Completion of Operations

At the completion of operations, the F3 COMPACT should be
checked with the Test Piece before switching off to ensure
satisfactory performance before being packed away. Once
completed:
a. Switch Off the detector.
b. Clean the detector and inspect for any signs of damage. Refer
to 5.1 Routine Care for more care instructions.
c. Remove the batteries from the Battery Compartment and stow
in Soft Carry Bag.
d. Disconnect the Earset.
e. Retract the Middle and Lower Shafts rotating the coil to the
stowed position.
f. Collapse Handle and pivot the retracted shafts securing in
position with the Armrest Strap.
g. Stow the detector in the Soft Carry Bag and Hard Case if
available.
h. Check all components are accounted for (especially the Test
Piece and Earset) and are correctly packed.
36