Minelab F3 compact Operation Manual page 9

F3 COMPACT Version 2 Operations Manual
Test Piece – conveniently stowed on the Armrest to allow the
operator to ensure the detector is working at its operational
capability.
Earset Connector – provides connection for the Earset and also
the programming cable when using the configuration software to
customise volume and sensitivity settings.
Main Body – waterproof housing containing the detector electronics
and batteries.
Handle Assembly – collapsible handle that also contains Ground
Balance/Audio Reset button, LED display, LED On/Off button, Noise
Cancel button, Volume Increase/Decrease and Battery Low LED
indicator.
Controls – On/Off and Sensitivity selection knobs – both controls
have a lift to turn safety feature to prevent accidental adjustment.
Shaft Hinge – pivot point for unfolding or folding the shafts. The
hinge is only locked in position when the Handle Assembly is in its
deployed position.
Upper, Middle, Lower Shafts – carbon fibre shafts that are
adjustable for operator comfort and for changes in demining
positions.
Upper and Lower Camlocks – self-cleaning locking mechanisms to
secure middle and lower shafts.
Coil Pivot Assembly – permits the tilt and rotation of the coil and
provides a tension screw for adjustment as required.
Coil – waterproof enclosed coil to eliminate possible interference
from vegetation. The coil's mono loop design ensures consistent
sensitivity around the entire circumference, and across the complete
surface of the coil.
Skid Plate – removable cover that protects and prolongs the life of
the coil thereby reducing maintenance costs.
7