Completion Of Operations - Minelab F3 Operation Manual

4.10

Completion of Operations.

operations, the F3 should be checked with the Test Piece before
switching off to ensure satisfactory performance before being
packed away. Once completed:
a. Turn the detector off.
b. Clean the detector and inspect for any signs of damage (Chapter
5).
c. Remove the batteries from the Battery Pack and stow in the
Hard Case or Soft Carry Bag.
d. Disconnect the Earset.
e. Retract the Middle and Lower Shafts (if necessary).
f. Stow in the Hard Case or Soft Carry Bag.
g. Ensure all components are correctly packed (especially the Test
Piece and Earset).
F3 Operations Manual
At the completion of
43