Completion Of Operations - Minelab F3 COMPACT Operation Manual

b. Once Noise Cancel is finished on the first detector, leave it
switched on. Ensure that the second detector is at least two
metres away and switch it on. Conduct Noise Cancel using the
Noise Cancel button of the second detector.
c. Continue this process for all detectors being used in close
proximity.
2 metres
Figure 25: Operating detectors in close proximity
4.8

Completion of Operations

At the completion of operations, the F3 COMPACT should be
checked with the Test Piece before switching off to ensure
satisfactory performance before being packed away. Once
completed:
a. Turn the detector off.
b. Clean the detector and inspect for any signs of damage.
c. Remove the batteries from the Battery Compartment and stow in
Soft Carry Bag.
F3 COMPACT Operations Manual
Noise Cancel
35