Energy Saving Panel; Operating The Oven - Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions

Self-Cleaning
The oven has a self-cleaning function. The oven will
run at a high temperature cycle to burn any cooking
residue to ash that is easily cleaned away with a damp
cloth. For safety, the oven will lock during the cleaning cycle.
See the 'Cleaning' section for further details on the self-
cleaning operation.

Energy Saving Panel

The oven has a divider feature (Fig. 2.14). With this in place
only one half of the oven is heated and only the right-hand
side elements are used. This saves energy and is ideal for
cooking most foods. When using the divider, condensation
may appear in the left-hand oven – this is normal.
For very large loads, or large dishes for special occasions then
the divider can be removed. This brings into use the elements
on the left-hand side as well as those on the right when a
function is selected.
All oven functions are available in full and divided forms and
shelves are provided for use in both forms.
WARNING!
n n
Take great care when removing the divider NOT to
scratch the inner glass door surface. Scratches in the
glass can cause stress and may cause the door to fail.
Removing the Divider
Make sure the cooker is cool before attempting to
n n
remove the divider.
Fully open the door and remove the oven shelves. When
removing the divider, tilt it slightly upwards and grip the
underside to prevent the metal base making contact with the
door glass (Fig. 2.15 and Fig. 2.16).
We recommend that you place a tea towel or similar on the
door glass before removing the divider. This should prevent
the door inner from scratching.
DO NOT place or slide metallic objects, including cookware,
on the door glass as this may cause scratching and
subsequent failure to occur.

Operating the Oven

The multi-function oven has two controls: a function selector
and a temperature setting knob (Fig. 2.17).
Turn the function selector control to a cooking function. Fig.
2.18 shows the control set for convectional oven cooking.
Turn the oven temperature knob to the temperature you
need. The oven heating light will glow until the oven has
reached the temperature you selected. It will then cycle on
and off during cooking as the oven maintains the selected
temperature (Fig. 2.19).
Fig. 2.14
ArtNo.281-0150 - Oven Divider
Fig. 2.15
ArtNo.062-0005 - Removing the divider (wrong)
Fig. 2.16
ArtNo.062-0004 - Removing the divider (right)
Fig. 2.17
Pro+ FXP MF oven controls
0
Temperature selector
11
ArtNo.270-0029
Function selector