Advertisement
Shenzhen Getech Technology CO.LTD
www.geeetech.com
There are six tags in total here. Configure relevant parameters of the printer here.
4.2Connection
Choose right Port and Baud Rate. For other parameters please leave them as default, and click
Apply.
Port ： Get the printer connected to the port of computer, which is corresponding to the USB
Serial Port in the Device manager.
Baud Rate: Corresponding to the Baud Rate in firmware. Generally it is set as 250000.
Advertisement
Need help?
Do you have a question about the Me Creator and is the answer not in the manual?
Questions and answers